A
-
Acid Hydrolysis
Structural properties and thermal stability of nano crystalline cellulose produced from waste paper [Volume 13, Issue 1, 2022, Pages 37-47]
-
Alkoxysilane
Investigation of the use of tetramethyl orthosilicate (Alkoxysilane) on compatibility, mechanical and physical properties of wood-cement particleboard [Volume 13, Issue 4, 2022, Pages 419-431]
-
Anatomical properties
The effect of heat treatment on anatomical, physical, color and mechanical properties of birch wood [Volume 13, Issue 4, 2022, Pages 519-529]
B
-
Beech
Modification of The Beech (Fagus orientalis) Wood Properties via Electricity [Volume 13, Issue 1, 2022, Pages 27-35]
-
Biodegradable Coating
The effect of corn zein coating on the strength and barrier properties of liner paper [Volume 13, Issue 2, 2022, Pages 213-223]
-
Biometric properties
Effect of altitude on biometric, physical and mechanical properties of caucasian alder species (Case study in Savadkuh region) [Volume 13, Issue 2, 2022, Pages 239-248]
-
Birch
The effect of heat treatment on anatomical, physical, color and mechanical properties of birch wood [Volume 13, Issue 4, 2022, Pages 519-529]
-
Bleachability
Investigation on the bleachability of hemicellulase-deinked pulp versus chemical deinking process [Volume 13, Issue 3, 2022, Pages 289-300]
C
-
Calcium Hydroxide
Environmental and strength properties evaluation of bleached recycled pulp with calcium hydroxide [Volume 13, Issue 1, 2022, Pages 71-81]
-
Calcium scale
Environmental and strength properties evaluation of bleached recycled pulp with calcium hydroxide [Volume 13, Issue 1, 2022, Pages 71-81]
-
Carboxy-Methyl Cellulose
Hydrogel composite based on thermal modified carboxymethyl cellulose and nanozeolite [Volume 13, Issue 4, 2022, Pages 433-443]
-
Caucasian alder
Effect of altitude on biometric, physical and mechanical properties of caucasian alder species (Case study in Savadkuh region) [Volume 13, Issue 2, 2022, Pages 239-248]
-
Cellulose industry wastewater
Performance of perlite as an adsorbent on the physical treatment of cellulose industry wastewater [Volume 13, Issue 3, 2022, Pages 313-323]
-
Cellulose nanocrystals
Surface modification of cellulose nanocrystals using radio-frequency plasma [Volume 13, Issue 1, 2022, Pages 49-60]
-
Cellulose Nanofibers
The effect of different additives on the properties of handsheet prepared from office waste paper [Volume 13, Issue 2, 2022, Pages 119-131]
-
Chemical oxygen demand (COD)
Performance of perlite as an adsorbent on the physical treatment of cellulose industry wastewater [Volume 13, Issue 3, 2022, Pages 313-323]
-
Chemical oxygen demand (COD) of wastewater
Environmental and strength properties evaluation of bleached recycled pulp with calcium hydroxide [Volume 13, Issue 1, 2022, Pages 71-81]
-
Chitosan
The Influence of Mixing Method of lignocellulosic Nanofibers with Recycled Pulp in the Presence of Microparticle System on the Final Paper Properties [Volume 13, Issue 1, 2022, Pages 103-113]
-
Chlorophytum comosum plant extract
Influence of additive of Chlorophytum comosum plant extract on physicochemical, structural and mechanical properties of urea formaldehyde resin [Volume 13, Issue 3, 2022, Pages 361-373]
-
Compatibilizer
Investigating the bending creep behavior of poplar wood plastic plywood manufactured by thermoplastic films [Volume 13, Issue 4, 2022, Pages 393-403]
-
Contact angle
The effect of heat treatment on anatomical, physical, color and mechanical properties of birch wood [Volume 13, Issue 4, 2022, Pages 519-529]
-
Creep
Simulation and prediction of bending performance of wood plastic composite profiles using finite element method by ANSYS Workbench software [Volume 13, Issue 3, 2022, Pages 325-344]
-
Creep
Investigating the bending creep behavior of poplar wood plastic plywood manufactured by thermoplastic films [Volume 13, Issue 4, 2022, Pages 393-403]
-
Cross-laminated timber
Strengthening of the cross-laminated timber using glass fiber-reinforced polymer on the lateral performance of the single shear lap joints [Volume 13, Issue 1, 2022, Pages 1-14]
D
-
Damage assessment
Life cycle assessment of SMF and GMF Fluting paper production process [Volume 13, Issue 3, 2022, Pages 249-259]
-
Data Palm
Investigation of the use of tetramethyl orthosilicate (Alkoxysilane) on compatibility, mechanical and physical properties of wood-cement particleboard [Volume 13, Issue 4, 2022, Pages 419-431]
-
Degree of polymerization
Modeling and Predicting the optimal conditions in microcrystal cellulose production from bagasse using the Response Surface Methodology (RSM) [Volume 13, Issue 2, 2022, Pages 225-238]
-
Dispersion
Surface modification of cellulose nanocrystals using radio-frequency plasma [Volume 13, Issue 1, 2022, Pages 49-60]
E
-
ECF bleaching
Production of nanocrystals and nanofibrils from unbleached and bleached soda pulp with ECFlight bleaching sequence and comparison of their morphological and thermal properties [Volume 13, Issue 4, 2022, Pages 457-471]
-
Electric current
Modification of The Beech (Fagus orientalis) Wood Properties via Electricity [Volume 13, Issue 1, 2022, Pages 27-35]
F
-
Finish Color Spectrum
The study of Effective Factors On Selecting Finish Type and Color Spectrum and Finishing Method In The Industry Of Home Furniture (Case Study: Tehran Province) [Volume 13, Issue 2, 2022, Pages 147-160]
-
Fluorescent staining
Fluorescent labling methods by rhodamine B isothiocyanate in cellulose Materials [Volume 13, Issue 4, 2022, Pages 405-417]
-
Fluting Paper
Life cycle assessment of SMF and GMF Fluting paper production process [Volume 13, Issue 3, 2022, Pages 249-259]
-
Fungal test
Investigation of ِDecay Resistance of Poplar Plywood with Encapsulated Pesticides [Volume 13, Issue 2, 2022, Pages 201-212]
-
Furniture Finishing
The study of Effective Factors On Selecting Finish Type and Color Spectrum and Finishing Method In The Industry Of Home Furniture (Case Study: Tehran Province) [Volume 13, Issue 2, 2022, Pages 147-160]
-
Furniture industry
Provide a strategic marketing model in the furniture industry based on exploratory mixed research plan [Volume 13, Issue 2, 2022, Pages 171-186]
G
-
Gamma test
Identification and determination of the effect of factory control variables on the physical and mechanical properties of medium density fiberboard with artificial neural network system [Volume 13, Issue 3, 2022, Pages 275-287]
-
Glass Fiber Reinforced Polymer
Strengthening of the cross-laminated timber using glass fiber-reinforced polymer on the lateral performance of the single shear lap joints [Volume 13, Issue 1, 2022, Pages 1-14]
-
Glass transition temperature
Investigation of the mechanical-dynamic and thermal properties of nanocomposites manufactured from rapeseed stalk flour/ nanographene and high-density polyethylene [Volume 13, Issue 4, 2022, Pages 445-456]
-
Grapevine pruning
Particles from grapevine pruning residue as a bio-based substitute for wood in hybrid particleboard production [Volume 13, Issue 4, 2022, Pages 509-518]
H
-
Hemicellulase enzyme
Investigation on the bleachability of hemicellulase-deinked pulp versus chemical deinking process [Volume 13, Issue 3, 2022, Pages 289-300]
-
Hexamethyl disiloxane
Surface modification of cellulose nanocrystals using radio-frequency plasma [Volume 13, Issue 1, 2022, Pages 49-60]
-
Home Furniture Industry
The study of Effective Factors On Selecting Finish Type and Color Spectrum and Finishing Method In The Industry Of Home Furniture (Case Study: Tehran Province) [Volume 13, Issue 2, 2022, Pages 147-160]
-
Hydrogen peroxide bleaching
Environmental and strength properties evaluation of bleached recycled pulp with calcium hydroxide [Volume 13, Issue 1, 2022, Pages 71-81]
I
-
Industrial panels
Particles from grapevine pruning residue as a bio-based substitute for wood in hybrid particleboard production [Volume 13, Issue 4, 2022, Pages 509-518]
K
-
Keywords: friction materials
Investigation of using rice hask and paper waste to make free copper brake lining [Volume 13, Issue 1, 2022, Pages 61-70]
L
-
Life Cycle Assessment
Life cycle assessment of SMF and GMF Fluting paper production process [Volume 13, Issue 3, 2022, Pages 249-259]
-
Lignocellulosic nanocrystals (LCNCs)
Production of nanocrystals and nanofibrils from unbleached and bleached soda pulp with ECFlight bleaching sequence and comparison of their morphological and thermal properties [Volume 13, Issue 4, 2022, Pages 457-471]
-
Lignocellulosic Nanofiber
The Influence of Mixing Method of lignocellulosic Nanofibers with Recycled Pulp in the Presence of Microparticle System on the Final Paper Properties [Volume 13, Issue 1, 2022, Pages 103-113]
-
Lignocellulosic nanofibrils (LCNFs)
Production of nanocrystals and nanofibrils from unbleached and bleached soda pulp with ECFlight bleaching sequence and comparison of their morphological and thermal properties [Volume 13, Issue 4, 2022, Pages 457-471]
-
Likert scale
The study of Effective Factors On Selecting Finish Type and Color Spectrum and Finishing Method In The Industry Of Home Furniture (Case Study: Tehran Province) [Volume 13, Issue 2, 2022, Pages 147-160]
M
-
Mass reduction
Investigation of using rice hask and paper waste to make free copper brake lining [Volume 13, Issue 1, 2022, Pages 61-70]
-
MDF
Evaluation of resistance of wooden biscuit joints in mediumdensity fiberboard and particleboard under tensile and shear loads in T and L-type members [Volume 13, Issue 2, 2022, Pages 187-200]
-
MDF wastes
Structural properties and thermal stability of nano crystalline cellulose produced from waste paper [Volume 13, Issue 1, 2022, Pages 37-47]
-
Mechanical and physical properties
Investigation of the use of tetramethyl orthosilicate (Alkoxysilane) on compatibility, mechanical and physical properties of wood-cement particleboard [Volume 13, Issue 4, 2022, Pages 419-431]
-
Mechanical properties
Investigation on the mechanical and optical properties of kraft paper coated with a combination of pectin, polyvinyl alcohol and nano titanium dioxide [Volume 13, Issue 1, 2022, Pages 15-25]
-
Mechanical properties
The Influence of Mixing Method of lignocellulosic Nanofibers with Recycled Pulp in the Presence of Microparticle System on the Final Paper Properties [Volume 13, Issue 1, 2022, Pages 103-113]
-
Mechanical properties
Effect of altitude on biometric, physical and mechanical properties of caucasian alder species (Case study in Savadkuh region) [Volume 13, Issue 2, 2022, Pages 239-248]
-
Mechanical properties
Identification and determination of the effect of factory control variables on the physical and mechanical properties of medium density fiberboard with artificial neural network system [Volume 13, Issue 3, 2022, Pages 275-287]
-
Mechanical properties
Comparison of physical and mechanical properties of Pinus taeda wood with common fast-growing species [Volume 13, Issue 3, 2022, Pages 345-359]
-
Mechanical properties
Designing, Manufacturing and mechanical investigating of joint in laminated stringer of spiral stairs from poplar wood [Volume 13, Issue 3, 2022, Pages 375-391]
-
Mechanical properties
The effect of heat treatment on anatomical, physical, color and mechanical properties of birch wood [Volume 13, Issue 4, 2022, Pages 519-529]
-
Medium density fiberboard
Identification and determination of the effect of factory control variables on the physical and mechanical properties of medium density fiberboard with artificial neural network system [Volume 13, Issue 3, 2022, Pages 275-287]
-
Microparticles
The Influence of Mixing Method of lignocellulosic Nanofibers with Recycled Pulp in the Presence of Microparticle System on the Final Paper Properties [Volume 13, Issue 1, 2022, Pages 103-113]
-
Microwave Radiation
Investigation on the Possibility of Physical and Mechanical Properties Modification of Wood-Plastic Nanocomposites By Microwave Radiation [Volume 13, Issue 3, 2022, Pages 261-273]
-
Midpoint Index
Life cycle assessment of SMF and GMF Fluting paper production process [Volume 13, Issue 3, 2022, Pages 249-259]
-
Mixing method
The Influence of Mixing Method of lignocellulosic Nanofibers with Recycled Pulp in the Presence of Microparticle System on the Final Paper Properties [Volume 13, Issue 1, 2022, Pages 103-113]
-
Modeling
Modeling and Predicting the optimal conditions in microcrystal cellulose production from bagasse using the Response Surface Methodology (RSM) [Volume 13, Issue 2, 2022, Pages 225-238]
-
Moduli of elasticity
Modification of The Beech (Fagus orientalis) Wood Properties via Electricity [Volume 13, Issue 1, 2022, Pages 27-35]
-
Moduli of Rapture
Modification of The Beech (Fagus orientalis) Wood Properties via Electricity [Volume 13, Issue 1, 2022, Pages 27-35]
-
Moisture gradient
Moisture induced stresses in cross laminated timers (CLT) made from hydrothermally modified fir wood [Volume 13, Issue 4, 2022, Pages 497-507]
-
Moisture induced stresses
Moisture induced stresses in cross laminated timers (CLT) made from hydrothermally modified fir wood [Volume 13, Issue 4, 2022, Pages 497-507]
N
-
Nano-Composite Hydrogel
Hydrogel composite based on thermal modified carboxymethyl cellulose and nanozeolite [Volume 13, Issue 4, 2022, Pages 433-443]
-
Nanocrystalline cellulose
Structural properties and thermal stability of nano crystalline cellulose produced from waste paper [Volume 13, Issue 1, 2022, Pages 37-47]
-
Nanographene
Investigation of the mechanical-dynamic and thermal properties of nanocomposites manufactured from rapeseed stalk flour/ nanographene and high-density polyethylene [Volume 13, Issue 4, 2022, Pages 445-456]
-
Nanosilica
Investigation on the Possibility of Physical and Mechanical Properties Modification of Wood-Plastic Nanocomposites By Microwave Radiation [Volume 13, Issue 3, 2022, Pages 261-273]
-
Nano Titanium dioxide
Investigation on the mechanical and optical properties of kraft paper coated with a combination of pectin, polyvinyl alcohol and nano titanium dioxide [Volume 13, Issue 1, 2022, Pages 15-25]
-
Nano-zeolite
Hydrogel composite based on thermal modified carboxymethyl cellulose and nanozeolite [Volume 13, Issue 4, 2022, Pages 433-443]
O
-
Office waste paper
The effect of different additives on the properties of handsheet prepared from office waste paper [Volume 13, Issue 2, 2022, Pages 119-131]
-
Old corrugated container pulp fibers
Effect of Self-assembly Layering Factors of Cationic Starch on Pulp Zeta Potential [Volume 13, Issue 1, 2022, Pages 83-96]
-
Optical Properties
Investigation on the mechanical and optical properties of kraft paper coated with a combination of pectin, polyvinyl alcohol and nano titanium dioxide [Volume 13, Issue 1, 2022, Pages 15-25]
P
-
Packaging cardboard
The effect of corn zein coating on the strength and barrier properties of liner paper [Volume 13, Issue 2, 2022, Pages 213-223]
-
Packaging paper
Investigation on the mechanical and optical properties of kraft paper coated with a combination of pectin, polyvinyl alcohol and nano titanium dioxide [Volume 13, Issue 1, 2022, Pages 15-25]
-
Pak Choob Industrial Group
Investigating the effect of brand gender on brand loyalty with emphasis on the mediating role of brand love and perceived brand quality in Pak Choub Industrial Group [Volume 13, Issue 4, 2022, Pages 473-486]
-
Papermaking additives
A Comparison on the performance of cationic starch in external and internal applications for recycled linerboard [Volume 13, Issue 3, 2022, Pages 301-311]
-
Paper quality
Investigation on the bleachability of hemicellulase-deinked pulp versus chemical deinking process [Volume 13, Issue 3, 2022, Pages 289-300]
-
Particleboard
Evaluation of resistance of wooden biscuit joints in mediumdensity fiberboard and particleboard under tensile and shear loads in T and L-type members [Volume 13, Issue 2, 2022, Pages 187-200]
-
Paulownia
Effect of brown rot fungus on the functional characteristics of heat treated wood [Volume 13, Issue 2, 2022, Pages 161-170]
-
Pectin
Investigation on the mechanical and optical properties of kraft paper coated with a combination of pectin, polyvinyl alcohol and nano titanium dioxide [Volume 13, Issue 1, 2022, Pages 15-25]
-
Perceived Quality
Investigating the effect of brand gender on brand loyalty with emphasis on the mediating role of brand love and perceived brand quality in Pak Choub Industrial Group [Volume 13, Issue 4, 2022, Pages 473-486]
-
Pesticide
Investigation of ِDecay Resistance of Poplar Plywood with Encapsulated Pesticides [Volume 13, Issue 2, 2022, Pages 201-212]
-
Physical and mechanical properties
Effect of brown rot fungus on the functional characteristics of heat treated wood [Volume 13, Issue 2, 2022, Pages 161-170]
-
Physical and mechanical properties
Investigation on the Possibility of Physical and Mechanical Properties Modification of Wood-Plastic Nanocomposites By Microwave Radiation [Volume 13, Issue 3, 2022, Pages 261-273]
-
Pinus taeda
Comparison of physical and mechanical properties of Pinus taeda wood with common fast-growing species [Volume 13, Issue 3, 2022, Pages 345-359]
-
Plasma treatment
Surface modification of cellulose nanocrystals using radio-frequency plasma [Volume 13, Issue 1, 2022, Pages 49-60]
-
Plywood
Investigation of ِDecay Resistance of Poplar Plywood with Encapsulated Pesticides [Volume 13, Issue 2, 2022, Pages 201-212]
-
Poly ethylene
Investigating the bending creep behavior of poplar wood plastic plywood manufactured by thermoplastic films [Volume 13, Issue 4, 2022, Pages 393-403]
-
Polyonyl alcohol
Investigation on the mechanical and optical properties of kraft paper coated with a combination of pectin, polyvinyl alcohol and nano titanium dioxide [Volume 13, Issue 1, 2022, Pages 15-25]
-
Poly propylene
Investigating the bending creep behavior of poplar wood plastic plywood manufactured by thermoplastic films [Volume 13, Issue 4, 2022, Pages 393-403]
-
Poplar wood
Designing, Manufacturing and mechanical investigating of joint in laminated stringer of spiral stairs from poplar wood [Volume 13, Issue 3, 2022, Pages 375-391]
-
Pulp nanocrystals (PNCs)
Production of nanocrystals and nanofibrils from unbleached and bleached soda pulp with ECFlight bleaching sequence and comparison of their morphological and thermal properties [Volume 13, Issue 4, 2022, Pages 457-471]
-
Pulp nanofibrils (PNFs)
Production of nanocrystals and nanofibrils from unbleached and bleached soda pulp with ECFlight bleaching sequence and comparison of their morphological and thermal properties [Volume 13, Issue 4, 2022, Pages 457-471]
-
Punica granatum
Wood anatomy and fiber biometry of pomegranate wood (Punica granutum L.) in a radial and longitudinal direction of tree [Volume 13, Issue 4, 2022, Pages 487-496]
R
-
Rapeseed flour
Investigation of the mechanical-dynamic and thermal properties of nanocomposites manufactured from rapeseed stalk flour/ nanographene and high-density polyethylene [Volume 13, Issue 4, 2022, Pages 445-456]
-
Recycled papers
Investigation on the bleachability of hemicellulase-deinked pulp versus chemical deinking process [Volume 13, Issue 3, 2022, Pages 289-300]
-
Response surface methodology
Modeling and Predicting the optimal conditions in microcrystal cellulose production from bagasse using the Response Surface Methodology (RSM) [Volume 13, Issue 2, 2022, Pages 225-238]
S
-
Self-assembly layering
Effect of Self-assembly Layering Factors of Cationic Starch on Pulp Zeta Potential [Volume 13, Issue 1, 2022, Pages 83-96]
-
Shear strength
Evaluation of resistance of wooden biscuit joints in mediumdensity fiberboard and particleboard under tensile and shear loads in T and L-type members [Volume 13, Issue 2, 2022, Pages 187-200]
-
Silver nanoparticles
Modification of The Beech (Fagus orientalis) Wood Properties via Electricity [Volume 13, Issue 1, 2022, Pages 27-35]
-
Soda Pulp
Production of nanocrystals and nanofibrils from unbleached and bleached soda pulp with ECFlight bleaching sequence and comparison of their morphological and thermal properties [Volume 13, Issue 4, 2022, Pages 457-471]
-
Starch
A Comparison on the performance of cationic starch in external and internal applications for recycled linerboard [Volume 13, Issue 3, 2022, Pages 301-311]
-
Strategic Marketing
Provide a strategic marketing model in the furniture industry based on exploratory mixed research plan [Volume 13, Issue 2, 2022, Pages 171-186]
-
Strength and barrier properties
The effect of corn zein coating on the strength and barrier properties of liner paper [Volume 13, Issue 2, 2022, Pages 213-223]
-
Strength Properties
Environmental and strength properties evaluation of bleached recycled pulp with calcium hydroxide [Volume 13, Issue 1, 2022, Pages 71-81]
-
Surface treatment
Enhancement of recycled board strength by surface treatment and additives on size-press section [Volume 13, Issue 1, 2022, Pages 97-106]
-
Surface treatment
A Comparison on the performance of cationic starch in external and internal applications for recycled linerboard [Volume 13, Issue 3, 2022, Pages 301-311]
T
-
Thermal modification
Hydrogel composite based on thermal modified carboxymethyl cellulose and nanozeolite [Volume 13, Issue 4, 2022, Pages 433-443]
U
-
Urea formaldehyde resin
Influence of additive of Chlorophytum comosum plant extract on physicochemical, structural and mechanical properties of urea formaldehyde resin [Volume 13, Issue 3, 2022, Pages 361-373]
-
Urea formaldehyde resin
Particles from grapevine pruning residue as a bio-based substitute for wood in hybrid particleboard production [Volume 13, Issue 4, 2022, Pages 509-518]
V
-
Viscoelastic behavior
Investigation of the mechanical-dynamic and thermal properties of nanocomposites manufactured from rapeseed stalk flour/ nanographene and high-density polyethylene [Volume 13, Issue 4, 2022, Pages 445-456]
W
-
Waste paper
Structural properties and thermal stability of nano crystalline cellulose produced from waste paper [Volume 13, Issue 1, 2022, Pages 37-47]
-
Withdrawal resistance
Evaluation of resistance of wooden biscuit joints in mediumdensity fiberboard and particleboard under tensile and shear loads in T and L-type members [Volume 13, Issue 2, 2022, Pages 187-200]
-
Wood-Plastic Composite
Investigation on the Possibility of Physical and Mechanical Properties Modification of Wood-Plastic Nanocomposites By Microwave Radiation [Volume 13, Issue 3, 2022, Pages 261-273]
-
Wood Plastic plywood
Investigating the bending creep behavior of poplar wood plastic plywood manufactured by thermoplastic films [Volume 13, Issue 4, 2022, Pages 393-403]
Z
-
Zein
The effect of corn zein coating on the strength and barrier properties of liner paper [Volume 13, Issue 2, 2022, Pages 213-223]
-
Zeta Potential
Effect of Self-assembly Layering Factors of Cationic Starch on Pulp Zeta Potential [Volume 13, Issue 1, 2022, Pages 83-96]
Your query does not match with any item